Heavy Duty Toggle Bolts and Wing Nut Kit 50 Sets- 1/8'', 3/16'', 1/4'' Drywall Anchors & Screws Assortment with Nuts & Washers for Wall Mounting & Hanging

The kit includes three sizes: 1/8" (15 sets), 3/16" (20 sets), and 1/4" (15 sets), totaling 50 sets / 200 pieces with all necessary hardware per set.

These are designed for hollow wall surfaces including drywall, gypsum board, hollow brick, cement fiberboard, and wood board. They are not suitable for solid concrete or masonry.

Load capacity varies by size and wall material. Generally, 1/8" handles lighter loads (pictures, small frames), while 1/4" supports heavier applications (TVs, large mirrors). Always verify with your specific wall type before mounting heavy items.

Yes. The hardware is galvanized (zinc-plated) to resist rust and oxidation, making it suitable for long-term use in typical indoor environments.

Yes. These toggle bolts are commonly used for mounting TVs, mirrors, pictures, and shelves on hollow walls. Use the 1/4" size for heavier items and confirm your wall type and stud locations first.

For most standard drywall applications, the 3/16" size is a versatile choice. Use 1/8" for lighter fixtures and 1/4" for heavier loads requiring more holding strength.

Installation typically requires a drill with an appropriate bit to create the pilot hole, and a screwdriver or nut driver to tighten. No specialty tools are needed beyond standard household hardware.