DYRABREST 40HP 2-Stroke 703cc Outboard Motor, Long Shaft Water Cooled Marine Boat Engine with Tiller Handle, Manual Start for Fishing Boats, Inflatable Boats, Pontoon (Black)

Application

It is suitable for 13.12-19.69ft long boats such as fishing boats, wooden boats, plastic boats, iron boats, logging boats, and inflatable boats, which can be used for fishing, aquaculture, outdoor adventure, surfing, life-saving, and other activities.

Specification 

Color: Black

Material: Aluminum

Process: Plastic Spraying

Type: 2 Stroke

Horsepower: 40HP

Displacement: 703cc

Max. Output Power: 25.7KW             

Maximum Speed: 4500-5500RPM

Gear Ratio: 2:0

Mixing Ration: Gasoline: Oil= 50:1

Fuel Tank Capacity: 24L/6.34Gal

Speed: 30-35km/h/ 18.64-21.75miles/h(Depends on Vessel Type and Deadweight)

The Number of Cylinders: 2

Gear Position: F-N-R

Ignition System: CDI

Shift Position: Clutch Control

Control System: Tiller Control

Cooling System: Water Cooling

Starting Method: Manual Start

Recommended Fuel: #92 Lead-free Gasoline

Recommended Engine Oil: 2 Stroke Engine Oil(Not Included)

Trim and Tilt System: Manual Tilt

Thrust: Within 1T/2204.6lbs

Applicable Boat Size: 4-6m/13.12-19.69ft

Product Size: 74*136cm/29.13*53.54in

Package Size: 115*87*41cm/45.28*34.25*16.14in

Gross Weight: 53.5kg/117.95lbs     

Net Weight: 52kg/114.64lbs

Notes

1. Please note that this machine can only use two-stroke special oil (not included), please do not use four-stroke oil, automobile oil and gear oil. We recommend using a mixture of 90-93 unleaded gasoline and 2-stroke oil for the fuel, and the recommended oil is TC-W3 (not included).

2. New machine within ten hours for break-in period, the fuel ratio of gasoline and oil is 30:1, after ten hours the ratio of gasoline and oil is 50:1, please make sure that the gasoline and oil are fully mixed, otherwise the machine will be damaged.

3. None of our machines contain gear oil. Please add gear oil to the gears before using the product and change the gear oil after the break-in period.

4. Please note that the driving speed will change due to different ship types, loads, and natural conditions.

5. Please do not disassemble the host at will to avoid unnecessary damage. The engine should be placed in a humid, well-ventilated place and avoid direct exposure to sunlight. Before long-term storage, the gasoline in the tank should be used up.

6. Before use, please prepare enough oil, bring life jackets, hand paddles, and necessary tools(not included), and check if the outboard is installed correctly.

7. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.