Model 3 Highland US Standard License Plate Holder | Aluminum Bracket

Product variants

Quantity

Details

SKU: TLF002
Availability: Out stock

Description

Model 3 Highland • Select Your Fitment

Highland-Specific U.S. Front Plate Mount

A purpose-built aluminum holder that secures a U.S.-standard short license plate to the Model 3 Highland front grille without drilling the painted bumper. Choose the matching Fitment option: 2024–Sep 2025 or Oct 2025 onward.

U.S. Plate FormatNo-Drill Snap-In

Model 3 Highland with U.S.-standard front license plate holder installed

U.S.-Standard PlateDesigned around the short American plate shape and four-corner fastener layout.

No Bumper DrillingThe vehicle bracket seats at the lower grille instead of making permanent bumper holes.

Aluminum ConstructionLightweight metal structure with a black weather-resistant finish.

Three Checks Before You Order

This is not a universal plate accessory. Confirm the vehicle generation, select the matching Fitment option, and check your plate format before ordering.

Highland Front Bumper

For the updated Tesla Model 3 Highland front end introduced for model year 2024.

U.S. Short Plate

Compare your plate dimensions and four mounting holes with the product images.

Vehicle-Mounting Holder

This product connects the plate to the car; it is not only a decorative perimeter frame.

Holder vs. Decorative Plate Frame

The two names are often mixed together, but their functions are different.

This Product: Front Plate Holder

Includes the Highland-specific lower mounting structure, plate support, fasteners, caps, and installation tool needed to connect a U.S. plate to the vehicle.

Different Product: Decorative Frame

A perimeter frame only surrounds the outside edge of a plate that already has a vehicle mounting point. It does not create the bumper-to-plate connection.

Reversible Mounting

Install and Remove Without Drilling

The Highland-specific lower clamp seats at the front grille while the plate fastens to the metal face plate. There is no need to drill the painted bumper or apply permanent adhesive.

No Bumper HolesRemovable Design

No-drill Model 3 Highland front license plate holder being installed

Secure Snap-In Structure

Stable Through Daily Driving

The lower mounting structure is shaped to lock into the Highland grille area and support the plate from below, helping reduce shifting and vibration on rough roads or during routine washing.

Grille-Locking BaseReduced Movement

Secure snap-in Model 3 Highland front plate holder in wet driving conditions

Highland-Specific Geometry

Positioned for the Updated Front End

The holder is shaped around the Model 3 Highland bumper and lower grille proportions, keeping the plate centered and visually aligned with the refreshed front fascia. Select the matching date-range variant for your vehicle.

Centered AlignmentModel-Specific Fit

Highland-specific U.S. front license plate holder aligned with the refreshed bumper

Road-Ready Material

Black Aluminum for All-Weather Use

The lightweight aluminum structure and coated black finish are designed for outdoor exposure to rain, road spray, changing temperatures, and daily vehicle use.

Rust-Resistant MetalWeather-Ready Finish

Black aluminum Model 3 Highland license plate holder shown in wet weather

Select the Correct Highland Fitment

Two Fitment options are available. Match the date range to your vehicle and confirm the front grille mounting point and U.S. plate hole pattern before ordering.

Model 3 Highland: 2024–Sep 2025Choose the “Model 3 Highland 2024-2025.9” option for the 2024 through September 2025 fitment range.

Model 3 Highland: Oct 2025 onwardChoose the “Model 3 Highland 2025.10+” option for the October 2025 and later fitment range.

Not for legacy Model 3 or long European platesThe 2017–2023 Model 3 front structure is different, and long EU-format plates require the corresponding European holder. Always compare the bumper and plate hole layout before ordering.

Complete Installation Set

Bracket, Fasteners, Caps, and Tool Included

The package provides the Highland-specific front mounting assembly plus the hardware needed to secure a U.S.-format plate.

1 × aluminum holder assembly for the Highland lower grille.
Plate fastener set with washers, nuts, and finishing caps.
Installation screwdriver for the supplied plate hardware.

Model 3 Highland U.S. front plate holder with screws caps washers and screwdriver

Installation Sequence

Mount the Holder, Then Secure the Plate

Work on a clean, dry bumper and confirm that the lower clamp and every plate fastener are fully seated before driving.

1CheckVerify your selected date-range variant, Highland bumper shape, and U.S. plate hole layout.

2PositionCenter the holder at the matching lower grille location.

3SeatEngage and tighten the lower mounting structure evenly.

4SecureAttach the plate with the supplied hardware and caps.

Installed Model 3 Highland U.S. plate holder with close views of the mounting base

Product Specifications

Product TypeFront License Plate Mounting Holder / Bracket

Vehicle FitTesla Model 3 Highland — select 2024–Sep 2025 or Oct 2025 onward

Plate StandardU.S.-Standard Short Plate

MaterialAluminum Alloy

FinishBlack Weather-Resistant Coating

Vehicle PositionFront Bumper / Lower Grille Area

InstallationNo Bumper Drilling or Permanent Adhesive

PackageHolder Assembly, Plate Hardware, Caps, and Tool

Frequently Asked Questions

Is this a decorative license plate frame?

No. This is a vehicle-mounted front license plate holder. Its Highland-specific lower structure connects the U.S.-format plate to the vehicle. A decorative frame only surrounds a plate that is already mounted.

Which Fitment option should I choose?

Choose “Model 3 Highland 2024-2025.9” for the 2024 through September 2025 fitment range, or “Model 3 Highland 2025.10+” for October 2025 onward. These are separate date-range options, not one universal fitment. If your vehicle is near the cutoff or you are unsure, contact us with your vehicle details and a front grille photo before ordering.

Does it fit a 2017–2023 Model 3?

No. This listing is for Model 3 Highland with two selectable fitment ranges: 2024–Sep 2025 and Oct 2025 onward. Legacy 2017–2023 Model 3 vehicles use a different mounting structure.

Does installation require bumper drilling?

No. The holder is designed to attach at the matching lower grille area without drilling the painted bumper or applying permanent adhesive. The license plate itself is secured to the holder with the supplied fasteners.

Will it fit a European long plate?

No. This listing is for the U.S.-standard short rectangular plate format. A long European plate requires the corresponding EU-format holder.

Is the holder made of plastic?

No. The primary mounting structure is aluminum alloy with a black outdoor finish. The package also includes the necessary plate fasteners, caps, washers, and installation tool shown in the main image.

Does this guarantee compliance with local law?

The holder provides a mounting base for a U.S.-format front plate, but plate display requirements vary by state and jurisdiction. Confirm the applicable local rules for plate placement and visibility.

Categories

Best Sale

Model 3 Highland US Standard License Plate Holder | Aluminum Bracket

Highland-Specific U.S. Front Plate Mount

Three Checks Before You Order